Fuze Inc. · Licensed roofing, electrical & building contractor · Tampa Bay
When your roof gets replaced, your panels have to come off and go back on. We do that work with our own licensed crew, pull the permit, put every roof attachment on new, and hand you a photo report when the system is back online. Hillsborough, Pinellas, Pasco and Manatee.
Why it matters who does this
Many roofers hand the solar part to whoever their salesman knows. That crew is rarely licensed or insured for solar, and the homeowner is the one left holding the risk.
Shingle manufacturers can deny a claim when penetrations were made by someone without a roofing license, or when old mounts were reused in a new roof.
Adjusters ask for a licensed contractor's invoice and a permit number. Without them, the solar portion of a roof claim gets pulled.
Unpermitted solar work shows up at closing. You end up paying to have it permitted and inspected then, at the worst possible time.
Our buyer's guide gives you six questions to ask any roofer or solar company, with a scorecard that tells you whether to sign. Run it on us too.
How a detach and reinstall works
We remove panels, wiring and racking the day before or morning of your roofing job, label everything, and stage it safely. Rails are kept when they still meet current code.
One scheduler on our side works directly with your roofing company and with you. Permit pulled for the solar work. We wait for the roof to pass its inspection.
All-new roof attachments and flashings, panels and wiring back, inspection passed, system tested and producing the same day. Photo report delivered.
Pricing
Every detail documented
Every job is documented in a photo report from detach to reinstall: the staged panels, the wiring and combiner, the line-side tap, and each new attachment before the panel goes back over it. It's your proof for the roofer, the adjuster, and the next buyer of your home.
Panels staged for the roofer
Combiner box and wiring
New attachment under the panelCertified to work on
Installer out of business?
If the company that put your solar on is gone, you still need someone licensed to take it off for the roof and put it back. We service, repair and reinstall systems from other installers every week, including Tesla, Enphase, SolarEdge and Generac systems.
Service area
Permits work a little differently in each county. See how it runs where you live: Hillsborough · Pinellas · Pasco · Manatee
Stop handing your license to a side crew. Become a Fuze Verified Partner: wholesale per-panel pricing you mark up, one scheduler, and a listing on our buyer's guide.
Fill out the details below to receive a comprehensive quote for your solar removal and reinstall. We guarantee transparent pricing and professional execution.
Don't risk your roof warranty with unlicensed solar crews. We are a fully licensed roofing and electrical contractor.
25-Year No-Leak Roof Penetration Warranty
Licensed Roofing, Electrical & Building
Permits Always Included
Zero Hidden Fees. No Surprises.
Certified by major manufacturers including Tesla, Enphase, and SolarEdge.
Questions homeowners ask
Yes. Reinstalling a PV array is permitted work in Hillsborough, Pinellas, Pasco and Manatee counties. We pull the solar permit and schedule the inspection on every job, and it's included in the per-panel price.
$200 to $250 per panel for a shingle-to-shingle reinstall on a rail-mounted system, including the permit, all-new roof attachments, the photo report and the 25-year no-leak warranty on our penetrations. Metal, tile and rail-less systems are priced after a free site inspection.
It can be, if the solar work is done by a company without a roofing license or if old attachments are reused in the new roof. We hold roofing, electrical and building licenses and every penetration is new and documented, so there is no question about who did the work or how.
Usually the length of the roofing job plus the inspection. Detach takes a day or less for a typical home. Reinstall is scheduled as soon as the roof passes its final inspection, and the system is tested and producing the same day.
We are certified on Tesla, Enphase, SolarEdge, Generac, Fronius, SMA and REC equipment and we work on systems from other manufacturers as well. We also take over systems whose original installer has gone out of business.
Twenty to sixty or more photos with written notes: panels staged, wiring and combiner, the line-side tap, each new attachment before the panel goes back, and the system back online. It's your proof for the roofer, your insurer, and a future buyer.